Vdom-Exceptions not showing all options

Hi,

This is mainly used if you need to override the default/global settings used for some/required vdoms. So the selected object should be those that needs an override from defaults.For example,

config system vdom-exception
edit 1
set object log.fortianalyzer.override-setting
set scope inclusive
set vdom "Student"
next
end

best regards,

Jin

To elaborate on Jin's post:

- the FortiGate will sometimes hide/not allow settings before a different parameter is set

- in the VDOM expection settings, you must first specify an object, and THEN you can specify scope, and if scope is inclusive/exclusive, THEN you can specify VDOMs.

You have something similar with interface settings in CLI for example - you can only set an IP if the interface is set to static; if it's set to DHCP, there is no 'set ip' option available.

Thank you both for your replies.

Jin, I am using VDOM Exceptions because I would like to have a HA cluster members in different physical sites. I need a unique vdom at each location for connectivity to different subnets. 

Debbie, I did try to set the object parameter just as you did in your example, however I still do not have any additional options.