Skip to main content
Centrocito
New Member
January 13, 2015
Solved

UTM throught IPSEC VPN

  • January 13, 2015
  • 1 reply
  • 5044 views

Hello community 6

 

So my question is this:

 

If I have a branch office connected via IPSEC VPN site-to-site, do I need UTM licence on my 60D in the branch office or can I filter everything through my 100D in the main office?

 

Thanks

    Best answer by rwpatterson

    You can filter through the main 100D. Two drawbacks:

    1) All the traffic has to go through that Internet pipe twice

    2) If the 100D goes south (or that Internet connection), any branch being filtered through it is effectively down

    1 reply

    rwpatterson
    New Member
    January 13, 2015

    You can filter through the main 100D. Two drawbacks:

    1) All the traffic has to go through that Internet pipe twice

    2) If the 100D goes south (or that Internet connection), any branch being filtered through it is effectively down

    Centrocito
    New Member
    January 13, 2015

    rwpatterson wrote:

    You can filter through the main 100D. Two drawbacks:

    1) All the traffic has to go through that Internet pipe twice

    2) If the 100D goes south (or that Internet connection), any branch being filtered through it is effectively down

    If I create the VPN by default it applies these settings we are talking about or do I need to configure anything additional??

    rwpatterson
    New Member
    January 13, 2015

    Apply them to the policy vpn to Internet.