Skip to main content
JD168
JD168
New Member
September 25, 2018
Solved

Upload speed to FG100D only 512k/600k from internet

  • September 25, 2018
  • 1 reply
  • 2760 views

Hello, for remote backup reasons I need to get a Seagte ReadyNAS 516 with Firmware 6.9.4 running. On the NAS I created users, shares and the needed applications (rsync, smb, http/webdav, ftp). On our FortiGate 100D (WAN DOWN 100MB/s UP 100MB/s) with Firmware 5.6.3 build 1547 I connected the NAS to a separate interface (role LAN) and set up a VIP with the required ports.   MTU is set to 1500 on both sides. File copy from my laptop over LAN works with 95MB/s (1GB/s connection). Copy files from remote locations via smb or ftp does not go higher than 512/600k (10MB/s or 5MB/s upload connection possible). Any idea what configuration mistake I made on the FG100D? Kind regards

Jay

    Best answer by JD168

    Hello,
    meanwhile the issue is solved. The NAS and the internet provider was changed. Now everything works as designed.

    1 reply

    makco10
    makco10
    Explorer II
    October 17, 2018

    Hello,

     

    I think in this case may be is not the Fortigate, and is something with the bandwidth of your remote users.

     

    Have you a test where the upload speed is major of 512k?

     

     

    JD168
    JD168AuthorAnswer
    New Member
    March 23, 2022

    Hello,
    meanwhile the issue is solved. The NAS and the internet provider was changed. Now everything works as designed.

    Terms & ConditionsAccessibility statement