Skip to main content
jmanual13
jmanual13
New Member
November 13, 2020
Question

upload config file HOWTO ?

  • November 13, 2020
  • 1 reply
  • 2919 views

Hi to everybody i try to upload to my 100F a file with addresses using tftp,  i'm using cli command:

execute upload config tftp <filename> comment (ip address of tfpt server)

get message in CLI Windows "Get config file from tftp server OK." but MAC1 not added

 

This is my filename content

#config-version=FG100F-6.4.3-FW-build1778-201021:opmode=1:vdom=0:user=admin #conf_file_ver=1769509346494782 #buildno=1778 #global_vdom=1 config firewall address     edit "MAC1"         set type mac         set start-mac "38:22:e2:1b:9c:ab"         set end-mac "38:22:e2:1b:9c:ab"     next end

 

Thanks in advance.

    1 reply

    boneyard
    boneyard
    Valued Contributor
    November 15, 2020

    that command is used to upload a full configuration not parts.

     

    if you want to add this configuration why not just paste it in the CLI?

     

    or if you want to upload parts you can use configuration scripts

     

    https://docs.fortinet.com.../configuration-scripts

    Terms & ConditionsAccessibility statement