Skip to main content
Holy
Holy
New Member
February 3, 2015
Solved

Upgrading HA Active-Passive Cluster

  • February 3, 2015
  • 2 replies
  • 19098 views

Hello,

 

soon i have to upgrade an 200D 5.0.9 Active-Passive Cluster to 5.2.2 .

 

Should i realy follow the steps described in the HA Doc? like just push the upgrade on the Master unit and he will do all the job by himself? 

 

what are your experience upgrading a cluster? should i better first upgrade Slave per FortiExplorer and after that upgrade the master ?

 

Thanks

Best answer by lkorbasiewicz_FTNT

Hello,

 

Just as patrick said, I can recommend following the documentation. I don't have two 200D's available now to build a cluster and check so I quickly tested it on FortiGate-VM with 5.0.9 cluster upgrade to 5.2.2 - everything went smoothly and few minutes later both VM's were upgraded.

I can also encourage you to go through all 5.2.x Release Notes and "What's New" documents here http://docs.fortinet.com/d/fortigate-whats-new-for-5.2 if you haven't done it already.

2 replies

patrick_z
patrick_z
New Member
February 3, 2015

Hello,

just follow the suggested way! Upgrade the master and the upgrade of the slave will be done automatically.

I never had issues with upgrading Cluster.

Read the changes pdf and follow the upgrade instructions

Cheers, Patrick

lkorbasiewicz_FTNT
Staff
lkorbasiewicz_FTNTAnswer
Staff
February 3, 2015

Hello,

 

Just as patrick said, I can recommend following the documentation. I don't have two 200D's available now to build a cluster and check so I quickly tested it on FortiGate-VM with 5.0.9 cluster upgrade to 5.2.2 - everything went smoothly and few minutes later both VM's were upgraded.

I can also encourage you to go through all 5.2.x Release Notes and "What's New" documents here http://docs.fortinet.com/d/fortigate-whats-new-for-5.2 if you haven't done it already.

Holy
HolyAuthor
New Member
February 3, 2015

Thank you both :=)

 

 

lkorbasiewicz wrote:

Hello,

 

Just as patrick said, I can recommend following the documentation. I don't have two 200D's available now to build a cluster and check so I quickly tested it on FortiGate-VM with 5.0.9 cluster upgrade to 5.2.2 - everything went smoothly and few minutes later both VM's were upgraded.

I can also encourage you to go through all 5.2.x Release Notes and "What's New" documents here http://docs.fortinet.com/d/fortigate-whats-new-for-5.2 if you haven't done it already.

Terms & ConditionsAccessibility statement