Skip to main content
CAD
CAD
New Member
August 24, 2016
Question

Upgrade Firmware to 5.2.8

  • August 24, 2016
  • 2 replies
  • 6382 views

Hello,

I have Fortigate 200D with firmware 5.2.3 i want to upgrade it to 5.2.8

i want your advise about this firmware ,Is there any problem with this firmware? or this stable 

 

Thanks

    2 replies

    FortiOSman
    FortiOSman
    New Member
    August 24, 2016

    Check out the 5.2.8 thread here: https://forum.fortinet.com/tm.aspx?m=139080

     

     

    -FortiOSman,

    Up, Up, and Away!

    Mirza
    Mirza
    New Member
    August 24, 2016

    Hi, 

     

    You need to follow Upgrade path

     

    CAD
    CADAuthor
    New Member
    August 25, 2016

    i think upgrade path is 5.2.3 >>5.2.5>>5.2.7>>5.2.8

     

    What about the downgrade path? if decide to revert back from 5.2.8 to 5.2.3

    FortiOSman
    FortiOSman
    New Member
    August 25, 2016

    Downgrade straight from 5.2.8 to your original version 5.2.3 and reload your config from that version. Config file changes are why you need to follow the upgrade path. Since you have the original you can downgrade straight to that. The same would go for upgrading. Once you have a working 5.2.8 config you do not need to follow the upgrade path again. You can go back from 5.2.3 to 5.2.8 in one hop.

     

     

    -FortiOSman,

    Up, Up, and Away!

    Terms & ConditionsAccessibility statement