Skip to main content
slouw
Explorer III
Oct 6, 2023 12:54 AM UTC
Question

Unable to add my active ISP WAN interface as SD_WAN Member to a SD_ZONE - Part 2

Greetings

Any idea how I can get wan interface to be selectable for my SD-WAN Zone?

Hardware = 40F

When I go Network > SD-WAM > my-sdwan-zone > EDIT > Interface Members

I do not see the entry that I want to add (wan interface)

I know from this post Unable...Part I that "there is some reference to it that still exists".

This Tech Note explains how to check for such references which I have done see below:

  1. wan physical interface
  2. wan physical interface GUI reference count is 0
  3. wan physical interface CLI reference appear to be 0 (got no output)
  4. lan physical interface (for comparison)
  5. lan physical interface GUI reference count is 2
  6. lan physical interface CLI reference appear to be 1 (so far as i can see)
 

2023-10-06 10h14m53s75 Post 2.jpg

 

 

6 replies

mgoswami
Staff
Staff
Oct 6, 2023 6:45 AM UTC

Hi Slouw,

 

I understand that you are not able to add the WAN interface to your SD-WAN Zone in Fortigate from GUI.

 

Please refer to this link and try to add it from the CLI and let us know if that works:

https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/942095/sd-wan-members-and-zones#zones

BR,

Manosh

slouw
slouwAuthor
Explorer III
Oct 8, 2023 8:45 PM UTC

Thanks I have tried another box in the event and it worked out

If I get to log on to the original problem box I will check it out as a matter of interest

Much appreciate your help and from @hbac / @esalija as well thank you

Hong_FTNT
Staff & Editor
Staff & Editor
Oct 6, 2023 3:42 PM UTC

Hi @slouw,

 

Please try Network > SD-WAM > my-sdwan-zone > EDIT > Interface Members > Create > Select wan and put Gateway IP > Click OK. After that, you should be alble to add wan to Interface members. 

 

Regards, 

esalija
Staff
Staff
Oct 6, 2023 3:44 PM UTC

Hi,

Please can you tell us on which FortiOS version are you running?

Best regards,

Erlin

slouw
slouwAuthor
Explorer III
Oct 7, 2023 11:11 AM UTC

Thanks @esalija  - v7.0.11 build0489 (Mature)

VinayHM
Staff
Oct 10, 2023 5:11 AM UTC

Hi @slouw 

 

Please follow this document, we can add an interface without deleting any references.

 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-add-the-interface-in-SD-WAN-member-without/ta-p/257907

 

Regards!
If you have found a solution, please like and accept it to make it easily accessible for others.

Thought Leadership. Security Summit. Thursday, November 12th, PGA National Resort, Palm Beach Gardens, FL.
Security Operations Summit: Modernize SecOps. Operate AI-Native.AMER: November 4 | 9:00 AM PST. India and SAARC: November 5 | 10:00 AM IST. EMEA: November 5 | 10:30 AM CET. APAC: November 5 | 11:00 AM SGT