Skip to main content
aitee
New Member
Mar 17, 2024 10:37 AM UTC
Question

Unable to access Web GUI after upgrade from 7.2.3 to 7.2.7 (100F)

I just upgraded my FG 100F from 7.2.3 to 7.2.7 using the recommended upgrade path (7.2.3 - 7.2.5 - 7.2.7). After upgrade, all FAP 221e stopped working. Wireless network is down. Wired network works though.

So with the upgrade, I am now unable to access the web gui. I can only access it thru ssh. I was not able to troubleshoot why my wireless network is down so I downgraded back to 7.2.3 then restored the backup. After restore, wireless is now back and working.

But web gui access is still "refused to connect". Prior to upgrade, I am able to access it with https://ipv4:8443.

I tried all troubleshooting guides I found but I can't get it to work.

Here's some that might help:

config system global     set admin-sport 8443     set admintimeout 10     set alias "FortiGate-100F"     set auth-cert "Fortinet_GUI_Server"     set autorun-log-fsck enable     set gui-certificates enable     set gui-fortigate-cloud-sandbox enable     set gui-theme onyx     set gui-wireless-opensecurity enable     set hostname "HMHO"     set management-port-use-admin-sport disable     set switch-controller enable     set timezone 38 end  config system interface     edit "lan"         set vdom "root"         set ip 192.168.0.1 255.255.255.0         set allowaccess ping https ssh snmp http fgfm fabric         set type hard-switch         set alias "LAN"         set stp enable         set device-identification enable         set role lan         set snmp-index 11         config ipv6             set ip6-address ::ffff:192.168.0.1/128         end     next end

2 replies

srajeswaran
Staff
Staff
Mar 18, 2024 6:13 AM UTC

Can you make sure admin-server-cert is configured as below and check?

 

# config sys global
     set admin-server-cert Fortinet_Factory
end

if this is already configured, please try the debugs mentioned in below article.

https://community.fortinet.com/t5/FortiGate/Technical-Tip-GUI-is-not-reachable-after-upgrade/ta-p/192936

AEK
SuperUser
SuperUser
Mar 18, 2024 9:23 AM UTC

Regarding FAP outage, try upgrade your FAP to 7.2.3.

Ref: https://docs.fortinet.com/document/fortiap/7.4.0/fortiap-and-fortios-compatibility-matrix/209640/fortiap-w2

In case the issue persists, you may try set the below to allow backward compatible ciphers.

config wireless-controller global
set tunnel-mode compatible
end
AEK
Thought Leadership. Security Summit. Thursday, November 12th, PGA National Resort, Palm Beach Gardens, FL.
Security Operations Summit: Modernize SecOps. Operate AI-Native.AMER: November 4 | 9:00 AM PST. India and SAARC: November 5 | 10:00 AM IST. EMEA: November 5 | 10:30 AM CET. APAC: November 5 | 11:00 AM SGT