Skip to main content
Nihas
Nihas
New Member
October 20, 2014
Solved

Time & Date in log is not correct

  • October 20, 2014
  • 3 replies
  • 25450 views
Hi , I have a 200Dbox which is running 5.2.1. Problem is ,in log the time is not appearing properly. Please see the below. Please help to fix this issue?
    Best answer by Dave_Hall

    Is the time/date/timezone correct on the management computer? I suspect the GUI is "converting" the log date/time stamp values to the local time on management computer. 

     

     

    3 replies

    Dave_Hall
    Dave_Hall
    New Member
    October 20, 2014
    Confirm the time zone is set up correctly on your fgt, also you may need to enable/disable daylight saving time.
    Nihas
    NihasAuthor
    New Member
    October 21, 2014

    Thanks Dave,

    But it seems everything is fine .

    daylight was enabled by default and didn't change anything.

     

    I could see the correct time on fortview, but not in any of the logs. 

     

     

    Dave_Hall
    Dave_HallAnswer
    New Member
    October 22, 2014

    Is the time/date/timezone correct on the management computer? I suspect the GUI is "converting" the log date/time stamp values to the local time on management computer. 

     

     

    Nihas
    NihasAuthor
    New Member
    October 23, 2014

    Thanks Dave for the new information.

    It's really helpful while doing troubleshooting related with logging issues.

    But in my case, timezone of both fgt and my laptop were same.

     

    Anyways, It seems issue has been resolved itself :) 

     

    chilun
    chilun
    New Member
    June 29, 2018

    I got this problem also.

    Terms & ConditionsAccessibility statement