Skip to main content
ponder
ponder
New Member
June 20, 2016
Question

Switch Ports - 60D

  • June 20, 2016
  • 1 reply
  • 9777 views

Hello,

 

I could do with some more help 

 

I have a 60D, LAN side consists of 3 ports configured as a hardware switch.  I am having a speed duplex issue on one port, I need to force one of the port to full/10.  (for some old device on the LAN)

 

The other ports negotiate correctly at 100/full & 1000/full as needed.

 

I checked the knowledge base and it seems I can only configure speed/duplex on switches via system global?  I know I can't edit the port individually, it gives an error - 'conflicts with names used by the switch interface hardware'

 

Can I not edit individual ports when they are part of a switch?  This seems backwards to me, or am I missing something fundamental?

 

Thanks,

Ponder.

    1 reply

    omega
    omega
    New Member
    June 21, 2016

    Can't you just give all Ports settings to the set command (e.g. ... 10half auto 100full)

    ponder
    ponderAuthor
    New Member
    June 21, 2016

    omega,

     

    It won't let me do that as the ports are part of a switch - it gives the error -> 'conflicts with names used by the switch interface hardware' <- when trying to edit the specific interface I need to change.

     

    Thanks,

    Ponder.

    omega
    omega
    New Member
    June 21, 2016

    I meant you edit the switch-interface and instead of giving one argument to the set command you give 3 arguments to it (a list of settings for the ports).

    Terms & ConditionsAccessibility statement