Skip to main content
Toshi_Esumi
SuperUser
Toshi_Esumi
SuperUser
July 31, 2022
Solved

Suspend upgrade steps at FMG

  • July 31, 2022
  • 2 replies
  • 3948 views

Last night one of FWF60Es' upgrade process for 6.0.10->6.2.7->6.2.9 caused the device to be offline in the first step (judged based on saved config revisions). Likely the first reboot got stuck and can't come up with 6.2.7 since the public IP on wan1 interface is not reachable.

We're hoping it would come back up after a power-cycled in Mon morning by the customer, but we don't want to get the upgrade process resumed for obvious reason. The customer would experience extended outage in busy Mon morning.

 

I'm looking for a way to suspend the upgrade process at the point with 6.2.7. Then want to resume it at Mon night. I so far couldn't find a menu to do it in Firmware page on the FMG. Is this possible?

 

Thanks,

 

 

Toshi

Best answer by Toshi_Esumi

So, since I got an automated email asking if I got a solution, I'm answering to my question myself and make this as a solution.
When I saw the upgrade status: Failed at both Firmware upgrade page and Task Monitor page, it'd apparently already given up the upgrade and would not try it again.

 

That was my misunderstanding how firmware upgrade would work when it didn't go well or, in this case, lost the device. I thought it would resume the unfinished upgrade process when the connection came back up. Therefore, no need to suspend the process, or any process to suspend doesn't exist any more.

 

Toshi

2 replies

Debbie_FTNT
Staff & Editor
Debbie_FTNT
Staff & Editor
August 1, 2022

Hey Toshi,

I'm not entirely sure if it's possible, but it should be via the Task Monitor:
- the upgrade button should have resulted in a task in FortiManager

- you might be able to interrupt or delete the task

- the pane can be accessed via System Settings > Task Monitor or, if a Task is running, by clicking the icon in the upper right corner.

 

- or, though a rather ugly workaround, change the managed IP in FortiManager Device Manager (so it thinks the FortiGate is now on a different IP than it actually is); essentially make the FortiGate unreachable on FortiManager until such time as you can try the upgrade again.

    Toshi_Esumi
    SuperUser
    Toshi_EsumiAuthor
    SuperUser
    August 1, 2022

    Thanks Debbie. Looks like it's already timed out and doesn't seem to try continuing after it came up online. I deleted the failed task but the status for this device at Firmware screen is still showing "Failed: 6.2.9" and the timestamp when failed.

    I guess it won't clear the status until we try upgrading it to 6.2.9 again. It's currently up and running with 6.2.7.

     

    Toshi

    Toshi_Esumi
    SuperUser
    Toshi_EsumiAuthorAnswer
    SuperUser
    August 3, 2022

    So, since I got an automated email asking if I got a solution, I'm answering to my question myself and make this as a solution.
    When I saw the upgrade status: Failed at both Firmware upgrade page and Task Monitor page, it'd apparently already given up the upgrade and would not try it again.

     

    That was my misunderstanding how firmware upgrade would work when it didn't go well or, in this case, lost the device. I thought it would resume the unfinished upgrade process when the connection came back up. Therefore, no need to suspend the process, or any process to suspend doesn't exist any more.

     

    Toshi

    Terms & ConditionsAccessibility statement