Skip to main content
rCubed
rCubed
New Member
February 11, 2020
Question

Strange issue with lan to lan communication

  • February 11, 2020
  • 1 reply
  • 2699 views

Hello all

 

So I have a Fortigate 60E that is linked to a Fortiswitch 108POE and a FAP221E in bridge mode as a network setup.

I recently picked up a small synology NAS (DS212J) connected it to the switch and powered it on. In FortiOS i see it has grabbed an IP address and in the CLI I can ping it no problem. I went to my laptop to set it up and nothing. the app to setup the synology (synology assistant) shows nothing and says can't find any servers. I tried ping from my laptop and i get nack Destination Host Unreachable. I have tried everything suggested and still can't get this working.

I also tried connecting my laptop directly to the switch and still the same thing.

On a side note I am unable to ping anything hard wired to the switch from my laptop connected over wifi.

 

Any help would be greatly appreciated

 

Thanks in advance

    1 reply

    Dave_Hall
    Dave_Hall
    New Member
    February 12, 2020

    Is the SSID binded to the same interface as the LAN connection (e.g. soft switch) or a separate subnet?  If separate the next question would be do you have any firewall policy polices allowing traffic between the two?

    rCubed
    rCubedAuthor
    New Member
    February 12, 2020
    The SSID is in the same subnet as the lan.
    Terms & ConditionsAccessibility statement