Skip to main content
jyoung1978
jyoung1978
New Member
August 25, 2024
Question

Static route with address from global object group

  • August 25, 2024
  • 1 reply
  • 1310 views

Anyone know why the static routes name addresses won't pull from my global address group? I am need to populate a static route with a number of address group that was created on my fabric root firewall. I see very limited addresses when doing this in the gut. Can this be done from the CLI?

1 reply

amrit
Staff & Editor
amrit
Staff & Editor
August 25, 2024

Are you accessing the objects from the downstream fortigate? Make sure the address group and object synchronization are enabled in the fabric. You can refer to this document : https://docs.fortinet.com/document/fortigate/7.6.0/administration-guide/880913/synchronizing-objects-across-the-security-fabric

jyoung1978
jyoung1978Author
New Member
August 25, 2024

Yes the object is already syncing to my spoke unit. The synced object shows up on the unit but I can access any of the addresses in the static routes. Even if I build an address local to the unit it still never shows up in the list under named addresses.

jyoung1978
jyoung1978Author
New Member
August 26, 2024

Got it working had to select static route configuration button on the fabric root.

Terms & ConditionsAccessibility statement