sslvpnd daemon is not running

Did you define any configuration authen rules?

e.g

        config authentication-rule             edit 1                 set groups "RAGRP1PLUS1"                 set portal "full-access"                 set realm ''                 set client-cert disable                 set cipher high                 set auth ldap             next             edit 2                 set groups "MYLOCALRoadWarrior1                 set portal "full-access"                 set realm ''                 set client-cert disable                 set cipher high                 set auth local             next         end

SUGGESTION:

Toggle the port from 443 to a unused port "commit" the chg and then go back and reset to port443

I would check for a proc afterwards

e.g

config vpn ssl settings

  set port 66443

end

{ wait 30 secs }

config vpn ssl settings

  set port 443

end

I would use the  fnsysctl command to look for a pid as a final check

     fnsysctl cat /var/run/sslvpnd.pid

And finally, i ran into this bug where the default "portal" needs to be toggle also. I can't replicate it so  tac indicate it might be something that screws up the portal access

If you tunnel and web-mode, check  by pointing your web-client at https:<your address-name> and see if you get a "access denied"

Ken