Skip to main content
simple1689
simple1689
New Member
April 20, 2017
Question

SSLVPN Unable to Reach WLAN Clients

  • April 20, 2017
  • 1 reply
  • 3716 views

SSLVPN can reach LAN (192.168.5.x) without issue, but cannot route to WLAN (192.168.11.x).

IPv4 Policy SSLVPN-LAN did not include the 192.168.11.x as a Destination, which I have added but does not appear to have resolved. 

 

Not seeing where the VPN is attempting to connect and fail either. Anyone point me in the direction of a relevant log?

    1 reply

    simple1689
    simple1689Author
    New Member
    April 21, 2017

    Thanks for the info. 

    Under Policy and Objects > Objects > Addresses, I have created a new Address IP Range for "WLAN" = 192.168.11.0-192.168.12.255

    Under VPN > SSL > Portals > Routing Address, added my WLAN Range

    Under Policy and Objects > IPv4 > SSL.ROOT - LAN, added "WLAN" as a Destination. 

    Already have rules to allow all from LAN > WLAN and vice-versa. 

     

    After making said changes, connected to VPN, and route print

    I do see the LAN Subnets (192.168.1.x-192.168.6.x) routed over SSLVPN Gateway, but I do not see the 192.168.11.x listed as a destination. 

     

    Edit: Re-checked Under VPN > SSL > Portals > Found I didn't save the changes to add the WLAN destination. DERP...anyways, re-added and SAVED. Reconnected to VPN, and the Routes to "WLAN" now appear. 

     

    Testing ICMP, and I cannot reach devices over the SSLVPN, but confirmed I can ping LAN-WLAN connected devices. The only thing that is odd to me is that there isn't a specific SSLVPN-WLAN zone. 

    Terms & ConditionsAccessibility statement