Skip to main content
Eric_Kom
Eric_Kom
New Member
February 5, 2018
Question

SSL VPN with multiple WAN interfaces as SD-WAN

  • February 5, 2018
  • 2 replies
  • 8937 views

Good day Folk,

I got a FGT 100D configured with SD-WAN working fine.

The SD-WAN got 1 PPoE and 2 DHCP from 4G modem connected as WANs.

But now my VPN is not reachable anymore since implemented SD-WAN; on ssl VPN settings, it is set to the WAN with PPoE (in this case DSL), but nothing is working.

Can anyone assist me on how to fix this issue?

Thanks in advance 

    2 replies

    baker_gt
    baker_gt
    New Member
    February 7, 2018

    you might need to update your rules to allow the incoming traffic still. WAN to SD-WAN changes LOTS!

     

    You will also need to setup the return traffic path too

     

    config vpn ssl settings set route-source-interface enable end

     

    tom_maz
    tom_maz
    New Member
    February 15, 2018

    Not sure if this will help, but you can try:

    config vpn ssl settings

    set route-source-interface enable

     

    Also, check the static routes on the WAN interfaces to make sure the PPPoE does not have lower distance than others.

    Terms & ConditionsAccessibility statement