Skip to main content
Gypsy_Dave
Gypsy_Dave
New Member
February 27, 2020
Question

SSL VPN remote access to multiple VLANS

  • February 27, 2020
  • 3 replies
  • 16057 views

Hi all,

I've got SSL-VPN working with the default LAN VLAN 192.168.178.x and my remote users have access.

I want to give them access to VLAN2 192.168.7.x as well. I've added the subnet to the destination field of the rule under policy and objects, IPv4 Policy but my remote clients cant ping or reach the VLAN2 network. 

Do I need to define somewhere else too?

Regards,

Rob

    3 replies

    tanr
    tanr
    New Member
    February 27, 2020

    Along with the security policy, have you set up a static route?

    Gypsy_Dave
    Gypsy_DaveAuthor
    New Member
    February 27, 2020

    tanr wrote:

    Along with the security policy, have you set up a static route?

    I've only done the security policy. Do I need a static route created manually? 

    Gypsy_Dave
    Gypsy_DaveAuthor
    New Member
    February 27, 2020

    So I would need a static route created with the following:

    destination subnet:MY VLAN2 subnet

    Interface SSL-VPN tunnel Interface

    gateway: ???????

    souvikt
    souvikt
    New Member
    July 25, 2023

    Step 1: under VPN > SSL-VPN Portals edit the split tunnel. Add necessary VLANs in Routing address override to define destination network that will be routed through tunnel.

    Step 2: Configure SSL VPN firewall policy. Add those same VLANs under destination. 

     

    These two steps will allow remote user to access internal VLANs. 

    VinayHM
    Staff
    VinayHM
    July 26, 2023

    Hi

     

    Is the policy created to access VLAN2 from an SSL VPN tunnel?

    If not create a policy

    The policy source interface will be an SSL VPN tunnel and the destination will VLAN2 interface

     

    Please let me know if will it help to resolve the issue.

    Terms & ConditionsAccessibility statement