Skip to main content
davross
davross
New Member
August 1, 2016
Question

SSL VPN certicate issues after firmware

  • August 1, 2016
  • 1 reply
  • 4778 views

hi all - if you can help then please let me know.

 

Since upgradeing from 5.0.7 to 5.0.9 i now get two problems.

1.  If i try to connect from internal wifi to ssl vpn i get a blank response from the browser

"The x.x.x.x page isn’t working

X.X.X.X didn’t send any data.

ERR_EMPTY_RESPONSE" 2.  I also get a https://x.x.x.x:1442/fgtauth?0121204813d9aa5b6 when trying to connect to the ssl vpn from outside of the network and receive a certificate error on the wildcard certificate (which was fine before).  Have created a new certificate and imported along with the CA for the provider but no improvement.  i also followed this article but no improvement.   http://kb.fortinet.com/kb....do?externalID=FD30760

    1 reply

    emnoc
    emnoc
    New Member
    August 1, 2016

    On the 1st part, you  probably don't have a SSLVPN listener enable on the interface or correct interfaces

     

    On the 2nd part, diag debug app sslvpn 1 and monitor the output when a user attempts to connect. Also ensure the cert is bound to the ssl vpn setting.

     

    davross
    davrossAuthor
    New Member
    August 2, 2016

    thanks for the response - appears that set auth-redirect-addr "my.fortigate.com" within http://kb.fortinet.com/kb/documentLink.do?externalID=FD30760 was the correct way to go but by dns not ip - resolved both issues once set.

     

    thanks

    Steve

    Terms & ConditionsAccessibility statement