Skip to main content
rikbignell
New Member
July 29, 2015
Solved

SSID to use same subnet at internal interface

  • July 29, 2015
  • 4 replies
  • 8057 views

Hi,

 

Is it possible to use a Fortiwifi 40C to bridge a wifi SSID with an internal interface so they can use the same subnet?

 

The document here suggests this is possible with an interface set to type switch but the 40C doesn't seem to allow this command.  Is it because only the larger models support software switches?  Seems unlikely that the 40C cant support this considering all of the Fortigate models come as standard with the internal interfaces bridged together.

 

http://docs-legacy.fortinet.com/fos50hlp/50/index.html#page/FortiOS%25205.0%2520Help/wifi-ethernet_bridge.058.2.html

 

The command just fails when you enter "set type switch" on a new interface.

 

We are using a Fortiwifi 40C with the latest v5.2.4 software.

Best answer by Sylvia

Hey,

 

did you try following:

config system switch-interface   edit <group_name>     set member <iflist>     set type {hub | switch | hardware-switch}     set vdom <vdom_name> end

 

Make sure that the interfaces (used for "set member") are not referenced by any firewall policies, DHCP server etc.

 

Sylvia

4 replies

Sylvia
SylviaAnswer
Explorer
July 29, 2015

Hey,

 

did you try following:

config system switch-interface   edit <group_name>     set member <iflist>     set type {hub | switch | hardware-switch}     set vdom <vdom_name> end

 

Make sure that the interfaces (used for "set member") are not referenced by any firewall policies, DHCP server etc.

 

Sylvia

rikbignell
New Member
July 30, 2015

You're a star.  Thats exactly what i need.  Thank you.

gschmitt
New Member
July 30, 2015

richard.bignell wrote:

Is it possible to use a Fortiwifi 40C to bridge a wifi SSID with an internal interface so they can use the same subnet?

Uhm ... why not simply create a new SSID and select Traffic Mode: "Local brdige with FortiAP's Interface"?

rikbignell
New Member
July 30, 2015

I tried that but couldnt get it to work. Might have been me missing something.  I used the commands above for creating a software switch and that worked for me.

 

Thanks for the suggestion though.

Thought Leadership Security Summit. Outpace New Threats with AI - enhanced defense. Tuesday, Septmeber 15, 8:30 AM - 2:30 PM PT. The Golf Club at Newcastle, WA.
Fortinet Flag the Hack. Wednesday, August 26, 9:00 AM - 5:00 PM ET, COSM, Atlanta, GA.
Virtual event | September 2026. SASE summit. The age of autonomous trust. Register here!