Skip to main content
Flyshuffle
Flyshuffle
New Member
July 13, 2015
Question

[Solved] Firmware 5.2.3 and Wildcard SSL Certificates

  • July 13, 2015
  • 1 reply
  • 7456 views

Hi Everyone,

 

I am trying to install a wildcard SSL certificate on our Fortigate 200D running firmware 5.2.3. I generated the certificate request right on the firewall itself. I am able to import the .crt certificate into the "External CA Certificates" section of the Certificates page under System > Certificates. However, I cannot select the certificate to use anywhere else - for example, under VPN > SSL > Settings > Server Certificate. It only allows me to select the factory certificate. Tech Support requested that I import the certificate as a local certificate, but when I try to do that, I get an error message - "The imported local certificate is invalid" - and cannot proceed. Has anyone had any better luck than I have and could point me in the right direction?

 

Thanks!

 

Mike

1 reply

Flyshuffle
FlyshuffleAuthor
New Member
July 13, 2015

I was able to figure it out. I think the problem was generating the certificate request on the firewall itself and something happened to the private key. I generated a new request with OpenSSL on a different machine, exported the private key and rekeyed my certificate. I was then able to import the new certificate and private key.  

 

While I didn't follow these two links exactly, they did provide some help, in case anyone else runs into the same issue I did.

 

https://stuff.purdon.ca/?page_id=83

https://www.godaddy.com/help/generating-a-certificate-signing-request-csr-apache-2x-5269

 

Terms & ConditionsAccessibility statement