SNMP on 40C with v5.0+ firmware

I' ve noticed with 5.0+ SNMP is no longer in the GUI on a 40C. There isn' t an option to enable it under admin settings either. So I went into the CLI to set it up. The problem is, I can' t get SNMP to connect using the same settings on my other Fortinet devices that have SNMP setup through the GUI. I have provided 2 screenshots. This first one is of my 80C that I configured SNMP through the GUI. This is what it shows in the CLI. This next shot is of the 40C in question that I configured in the CLI. This one will not connect. It says SNMP connection failed. Any ideas?