Skip to main content
shafnas
shafnas
New Member
February 20, 2019
Question

Site to Site connection issue

  • February 20, 2019
  • 1 reply
  • 2651 views

Hi,

 

I have an issue like, we have HQ and different branches also we setup the site to site connection policy inorder  to access our application in HQ. the site to site is up and both side is communicating but we have another application in which the ip is in different series and the same application i can access from local network but not pinging through site to site.

Please help.

 

Thank you

    1 reply

    Toshi_Esumi
    SuperUser
    Toshi_Esumi
    SuperUser
    February 20, 2019

    As in many posts over years in this forum, if some subnets don't work over vpn you need to check below:

    1. if phase2 selectors include the subnets in question unless you use the default 0/0<->0/0, which include all subnets.

    2. if the source side has proper routes toward the tunnel

    3. if the policy(ies) is limiting access.

    If they're fine, you need to use a regular debugging tools like "diag sniffer", "diag debug flow" to find out the breaking point.

    shafnas
    shafnasAuthor
    New Member
    February 20, 2019

    Thank you so much.. second point was the issue its working now

    Terms & ConditionsAccessibility statement