Skip to main content
moffl
moffl
New Member
August 8, 2016
Question

setting up a ipsec vpn

  • August 8, 2016
  • 3 replies
  • 15216 views

Hello:

 

I was wondering if there where any cookbooks out yet for 5.2.8 as i have come from a old 60c to a new 60d. I tried to setup the vpn's and rules the same way they were on the 60c but those don't work

    3 replies

    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    August 9, 2016

    hi,

     

    and welcome to the forums.

    First, what exactly does not work?

    Did you rebuild the VPN from scratch, or did you transfer the config (cut&paste) to the 60D? On v5.2, there is the VPN wizard which covers most of the regular VPN scenarios. Should be straightforward.

     

    Finally, have a look at https://video.fortinet.com/video/107/site-to-site-ipsec-vpn-using-wizard-in-fortios-5-2 , or

    https://video.fortinet.com/channel/vpn in general. I recommend reading the recipe after watching the video, information is dense.

    moffl
    mofflAuthor
    New Member
    August 9, 2016

    Hi Thanks for the links but cant get it to work will keep trying though.  I am building them from Scratch using the "Custom VPN Tunnel (No Template)". the remote sites that i had before were either pfsense boxes or cisco boxes and had no issue at all. This time it doesnt matter wether i use the cisco template, fortigate template I can not get it to work

    jawad_rezaie
    jawad_rezaie
    New Member
    August 31, 2016

    I have configured IPSec VPN Remote Access, but I do not have Receive on forticlient?

     

    I am using WAN LOAD Balancing!

    Terms & ConditionsAccessibility statement