Skip to main content
capricorn80
capricorn80
New Member
July 3, 2018
Question

Setting Fortigate 100E as Edge device in Office network

  • July 3, 2018
  • 2 replies
  • 6228 views

Hi!

 

I have a new Fortigate 100E and want to set it up in my network. I have layer 3 switch doing with VLan Interface and then leaf switches as trunk containing all the VLANS for servers.

 

We have 100MB internet connection terminating on the Fiber. 

 

Anyone guide me how should I proceed?

 

Thanks

    2 replies

    ericli_FTNT
    Staff
    ericli_FTNT
    Staff
    July 3, 2018

    Hi,

     

    Any specific requirement for your corp network?

    Toshi_Esumi
    SuperUser
    Toshi_Esumi
    SuperUser
    July 3, 2018

    Also, what kind of IP(s) delivered over the fiber and how (static, DHCP, PPPoE) would affect to your WAN side configuration.

    capricorn80
    capricorn80Author
    New Member
    July 3, 2018

    @ericli_FTNT: The main things to separate traffic VLAN. Right now we dont any thing to stop Intevlan routing but that will come in future. We have SSL and DMZ also on this firewall and yes Firewall is also sitting behind it.

     

    @Toshi: Its static.

     

    The Fiber will terminate directly into the FW.

    Toshi_Esumi
    SuperUser
    Toshi_Esumi
    SuperUser
    July 3, 2018

    If you don't get any additional IPs/subnet but just one IP from your ISP, you can forget about my question.

    Terms & ConditionsAccessibility statement