Skip to main content
SKIBBIDI
SKIBBIDI
New Member
March 12, 2026
Question

set dedicated-to management

  • March 12, 2026
  • 2 replies
  • 337 views

Hello is it possible  to use this feature on FortiGate 90G?

 

 

which ports can be used for this purpose?

 

I try to set port3 and got 

 

command parse error before 'dedicated-to'
Command fail. Return code -61

2 replies

yderek
Staff
yderek
Staff
March 13, 2026

Hi, @SKIBBIDI  Check below KB for the model support this 
https://community.fortinet.com/t5/FortiGate/Technical-Tip-FortiGate-dedicated-mgmt-feature-or-Out-of-band/ta-p/193699

 

Alternatively, if you looking for OOB, see below KB if your device is in HA setup , HA OOB dedicate management interface works in all HA pari , has no hardware limit

https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-Reserved-Management-Interface/ta-p/190132

 

 

 

ede_pfau
SuperUser
ede_pfau
SuperUser
March 13, 2026

in case of the 90G, I don't see any "mgmt" labeled port in the picture in your last post. So, no OOB mgmt for the 90G.

Don't mix that up with HA mgmt - if you run a cluster you can dedicate one port to management, and it's IP address and gateway will NOT be sync'ed between cluster members. (actually, up to 4 ports...)

SKIBBIDI
SKIBBIDIAuthor
New Member
March 13, 2026

how?

from what ive seen its not supported on a 90G - please show me sample config. 

funkylicious
SuperUser
funkylicious
SuperUser
March 13, 2026

you have already provided an image of the ports.

 

funkylicious_0-1773431865100.png

 

there's no mgmt interface and really you dont need one.

you can access the mgmt ports https/http/ssh/snmp on any interface, just enable the services on the port, but not on the wan one.

"jack of all trades, master of none"
Terms & ConditionsAccessibility statement