Skip to main content
sefer
New Member
October 22, 2019
Question

SD-WAN converter tool

  • October 22, 2019
  • 1 reply
  • 2636 views

Hi,

I have 1500D with single WAN interface.

Now, I added second WAN (another ISP) to make SD-WAN

 

Is there any tool to convert my. config from single-WAN to two-WAN (SD-WAN) ?

Or 

What practical way to do this?

 

Thanks

 

 

    1 reply

    sw2090
    SuperUser
    SuperUser
    October 23, 2019

    I don't think there is a converter to this.

     

    This will affect all policies using wan interfaces that are now in sdwan. These will no longer work because once part of sdwan the single wan interface is no longer avaiable for policies. So you would have to change all your policies for internet acecess to have sdwan as destination interface.

    If you need to access e.g. routers behind the wan (if you have no bridge mode) you also need to change those policies to sdwan.

    Also you might need to remove all default  routes and then create a new one on sdwan.

    Also remember to enter the gateway ips into sdwan if the wan don't do pppoe or dhcp.

    emnoc
    New Member
    October 23, 2019

    No tool, hint for future if you do or do not have a need for SDWAN , set the appliance up with SDWAN and with he single wan1 uplink as a member from day one

     

    Ken Felix