SD-WAN and PPPoE

I have Fortigate 60D with FortiOS 6.06 First ISP - static IP

Second ISP - PPPoE

When I add both of them to SD-WAN and make a static route 0.0.0.0/0.0.0.0 to SD-WAN interface in routing table appear two line:

Routing table for VRF=0
S* 0.0.0.0/0 [1/0] via 193.200.32.2, ppp1
                   [1/0] via 31.128.69.193, wan2

But after few seconds (5-6) line with ppp1 interface disappearing

New Member

I think problem with distance/priority.

I can change distance for PPPoE connection, but can'n for static

New Member

For SDWAN you should not need to do that.

Ken Felix

New Member

Does anyone has same problem?

Sign up