Skip to main content
yas13899
yas13899
Explorer
January 11, 2022
Solved

sd-wan and non sd-wan interfaces together

  • January 11, 2022
  • 1 reply
  • 10185 views

Hello...

I used to have one WAN line that handles all the traffic to outside...

 

Recently I added another 2 lines which I combined as an SD-wan interface, and when trying to configure static route I got the message:

"you cannot have duplicate routes on SD-wan and non SD-wan interfaces"

 

I need to keep the first WAN interface separated and don't combine it with the other two inside the SD-wan interface...

 

What should I do to accomplish this ??

 

Thank you

Best answer by akristof

Hello,

 

Thank you for your question. You have couple of options.

- If you are running more recent version of FOS, you can divide these interfaces into 2 different SDWAN zones. And use these zones when you are addressing them in routes or firewall policies

- In static route, do not use SDWAN interface, but specific interface. Then you will be able to create default route via any interface you want, even the ones that are not part of SDWAN configuration.

1 reply

akristof
Staff
akristofAnswer
Staff
January 11, 2022

Hello,

 

Thank you for your question. You have couple of options.

- If you are running more recent version of FOS, you can divide these interfaces into 2 different SDWAN zones. And use these zones when you are addressing them in routes or firewall policies

- In static route, do not use SDWAN interface, but specific interface. Then you will be able to create default route via any interface you want, even the ones that are not part of SDWAN configuration.

    Terms & ConditionsAccessibility statement