Same vlan-ID in defferent Vdom

Forum|Forum|7 years ago
May 29, 2019
1 reply
19701 views

Hi,

my topolgy will be

3 main servers in vlan 10,20,30 >>> connected to edge switch "1" >>> FG 1 on port 1

3 backup servers in vlan 10,20,30 >>> connected to edge switch "2" >>> FG 1 on port 2

2 egde switch "1&2" will connected on 2 ports in Fortigate

how i can make the FW is the getaway to this vlans

i know that in normal setup i can not create same sub-interface in different physical port in fortigate

is VDOM can help me in this topolgy ?

note that Fortigate is 81E doesnot support 802.3ad .

Toshi_Esumi

SuperUser

I don't know where vdoms come in to your situation as you said on the subject line. But the common setup in your situation is to use a hard-switch (config sys virtual-switch) with FGxxD/E series and bind those two ports into one, so that both ports have exact same set of vlan-tagged interfaces when you configure the vlan sub-interfaces on it.

amrshawkyAuthor

New Member

thanks alot but could you share with an KB that related to this hard-switch (config sys virtual-switch) with FGxxD/E

i asked about VDOM if there is help me or not ?

Fortigate 81E doesnot support Aggregated.

Toshi_Esumi

SuperUser

For anything new, look for it at the online help first:

https://help.fortinet.com/fos50hlp/56/Content/FortiOS/fortigate-networking/Interfaces/Virtual%20Switch.htm

Sounds like nothing to do with vdoms. Hard-switch would solve your problem.

Sign up

Login with SSO

Login to the community

Login with SSO