Skip to main content
cql-user-01
cql-user-01
Visitor III
November 8, 2024
Question

S248DF - Upgrade to 3.6.12 Shows Offline

  • November 8, 2024
  • 1 reply
  • 911 views

After upgrading my 248DF to 3.6.12, the unit is online and active, but shows offline and I cannot connect to it through fabric.  I removed power for 15 sec and plugged back in and still shows offline.  Suggestions?  

1 reply

spoojary
Staff
spoojary
Staff
November 8, 2024

Please check : https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Fix-FortiSwitch-showing-with-the-Offline/ta-p/197303

cql-user-01
cql-user-01Author
Visitor III
November 15, 2024

Thanks for the reply, I did go through this document and I do not get the warning about hte NTP : "WARNING : NTP service for DHCP entry should be set to local mode .... please check config <-- (It is necessary to change the ntp server to 'local' in the FortiLink interface.)"

 

I CAN ping the interface, so I know I'm connected on the Fortilink.  Any other suggestions?

Terms & ConditionsAccessibility statement