Skip to main content
Rolotek
Rolotek
New Member
October 24, 2024
Question

Rolotek

  • October 24, 2024
  • 1 reply
  • 920 views

Invaild port number 255
scsi_print_error[1130]scsi error

FORTIGATE 300D

1 reply

johnathan
Staff
johnathan
Staff
October 24, 2024

Are you able to provide some more details on where you are seeing that error?
May be worth doing a disk check as seen here: https://community.fortinet.com/t5/FortiGate/Technical-Note-Diagnose-command-to-test-flash-SSD/ta-p/196877

Never trust a computer you can't throw out a window.
Rolotek
RolotekAuthor
New Member
October 24, 2024

FortiGate-300D (12:38-03.06.2015)
Ver:05000002
Serial number:
RAM activation
CPU(00:000306a9 bfebfbff): MP initialization
CPU(01:000306a9 bfebfbff): MP initialization
CPU(02:000306a9 bfebfbff): MP initialization
CPU(03:000306a9 bfebfbff): MP initialization
Total RAM: 8192MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Boot up, scsi_print_error[1130]scsi error
boot device capacity: 0MB.
Press any key to display configuration menu...
......
Invaild port number 255
scsi_print_error[1130]scsi error
You must format the boot device.

johnathan
Staff
johnathan
Staff
October 24, 2024

When it says 'Press any key to display configuration menu', please press a key to bring up the BIOS menu. You should be able to press 'B' and boot into a backup partition. If this does not work, you will have to format the hard drive and flash new firmware on as per https://community.fortinet.com/t5/FortiGate/Technical-Tip-Formatting-and-loading-FortiGate-firmware-image/ta-p/197617

Never trust a computer you can't throw out a window.
Terms & ConditionsAccessibility statement