Restore conf from USB - Error

Forum|Forum|5 years ago
October 27, 2020
4 replies
7637 views

Trying to restore a configuration from file to a pair of 60e but keep receiving the message below. I downloaded the config directly from a production device so I *know* its good. Have tried on 2 different 60e. 2 usb drives. Factory reset both firewalls. Firmware is the same level on the device as on the config. Google shows virtually nothing for the return code. I'm lost here.

FGT60 # exec restore image usb config.conf
This operation will replace the current firmware version!
Do you want to continue? (y/n)y

Please wait...

Copy image config.conf from USB disk ...
Get image from USB disk OK.
Check image error.
Command fail. Return code -28

Best answer by lobstercreed

You're using the wrong command to restore a config. You're using the command for restoring firmware. When in doubt, use a "?"

If you do a "?" after execute restore you'll see the options and the one you want.

lobstercreedAnswer

New Member

You're using the wrong command to restore a config. You're using the command for restoring firmware. When in doubt, use a "?"

If you do a "?" after execute restore you'll see the options and the one you want.

random_guyAuthor

Explorer

Welp, I'm dumb....

Thanks

sw2090

SuperUser

Or use the usb auto restore feature. Then you just need to plug a stick with the coonfig on it with the correct filename and reboot the fgt with the stick plugged in and will auto restore that config.

sw2090

SuperUser

nt

Sign up

Login with SSO

Login to the community

Login with SSO