Remove Local BGP Default Route from BGP Table

We currently have a problem with BGP on a 1240B running v5.0,build0322 (GA Patch 13)   We are seeing an extra local route in BGP that is breaking the default we receive from our ISP.   For now we have added a static as a work around but will need this to be reverted back to BGP asap.  We have tried clearing all BGP peers "execute router clear bgp all" but it does clear the local route.   firewall (dmz) # get router info bgp network 0.0.0.0 BGP routing table entry for 0.0.0.0/0 Paths: (3 available, best #3, table Default-IP-Routing-Table)   Not advertised to any peer   65111 8111     1.1.1.1 from 1.1.1.1 (85.116.1.1)       Origin IGP metric 0, localpref 100, weight 100, valid, external       Last update: Thu Jul 20 22:55:47 2017     65111 8111     2.2.2.2 from 2.2.2.2 (85.116.2.2)       Origin IGP metric 0, localpref 100, weight 200, valid, external       Last update: Thu Jul 20 22:55:47 2017     Local     0.0.0.0 from 0.0.0.0 (3.3.3.3)       Origin IGP, localpref 100, weight 32768, valid, sourced, local, best       Last update: Thu Jul 20 22:32:38 2017   The problem occurred when the following commands were added.  Even though we have rolled back the extra route still remains.   Commands Applied.   config neighbor edit "172.31.1.1" set capability-default-originate enable next edit "172.31.1.2" set capability-default-originate enable next edit "172.31.1.3" set capability-default-originate enable next edit "172.31.1.4" set capability-default-originate enable next end     Rollback:   config neighbor edit "172.31.1.1" unset capability-default-originate next edit "172.31.1.2" unset capability-default-originate next edit "172.31.1.3" unset capability-default-originate next edit "172.31.1.4" unset capability-default-originate next end