Skip to main content
slothy
slothy
New Member
January 26, 2016
Solved

remove device and block form certain SSID's

  • January 26, 2016
  • 1 reply
  • 6681 views

i swore i was able to do this before, but is there a way to block a device (or even better yet all mobile devices) on a certain SSID and only allow them on the other SSID? 

 

foritnet 100d (5.4) with 4 FP221B-v5.4. we have our guest network (which i want the mobile deivces to use) and our network side SSID, which a few people seem to seem connect to since they know the password. 

 

thanks

brian

 

 

 

    Best answer by Dave_Hall

    If this was on 5.0.x codebase, you would create a standard DHCP server for the wifi SSID, and set the Unknown MAC Address" option to either assign or block.  I am assuming it is still the same/similar option on 5.4 firmware.

     

     

    1 reply

    Dave_Hall
    Dave_HallAnswer
    New Member
    January 26, 2016

    If this was on 5.0.x codebase, you would create a standard DHCP server for the wifi SSID, and set the Unknown MAC Address" option to either assign or block.  I am assuming it is still the same/similar option on 5.4 firmware.

     

     

    slothy
    slothyAuthor
    New Member
    January 26, 2016

    thank you, i did figure that part out after i posted - same way on 5.4 pretty much.  i need to readup and see if i can block all mobile devices on a SSID from joining

    osipof
    osipof
    New Member
    April 5, 2016

    It seems the MAC address access control list option has been removed from firmware 5.2.5

    Terms & ConditionsAccessibility statement