Skip to main content
youtty
youtty
New Member
January 17, 2025
Question

Regarding the issue of not being able to connect to the console of FortiGate 60F using tera term

  • January 17, 2025
  • 1 reply
  • 950 views

I can no longer connect to the console of my FortiGate 60F.

Does anyone know how to solve this?

I am trying to access the console with teraterm. When I start up fortigate, I can access the console, but after a while, pressing Enter does not respond.

I believe there is no physical problem because I can connect to the console of devices other than fortigate using the same cable and PC.

The firmware I am using is FGT60F-7.4.5-FW-build2702-240916.

1 reply

ebilcari
Staff
ebilcari
Staff
January 17, 2025

What are the last lines you see on the console output, does the FGT normally boot and is it functional?

Emirjon
    youtty
    youttyAuthor
    New Member
    January 17, 2025

    Thank you for your reply.

    The last thing that is output to the console screen is "hostname#".

    I have set the idle timeout to 30 minutes, and when the idle timeout expires, I think "login:" is normally output. The device is working properly.

      ebilcari
      Staff
      ebilcari
      Staff
      January 17, 2025

      You can verify from the configuration if console access is disabled, or if the baud rate configuration is changed.

      Emirjon
      Terms & ConditionsAccessibility statement