Skip to main content
Sathapon_SS
Sathapon_SS
Explorer II
March 28, 2022
Solved

Question about the setting of Virtual Server(loadbalance)

  • March 28, 2022
  • 1 reply
  • 1722 views

Hello,

 

I have a question about the setting of Virtual Server(loadbalance). Please see the detail as below.

 

-There are 2 Real Servers and I want Real Server1 is Active and Real Server 2 is Standby.
-If a Real Server1 fails. Real Server2 to be active instead. When Real Server1 is back. Can FortiGate automatically set Real Server 1 as Standby? I want Real Server1 is standby after coming up.

 

I tested many settings. but when Real Server1 is back. It will always be back to active. Does anyone have a solution for this situation?

 

Thank you.

Best answer by jintrah_FTNT

Dear Sathapon,

 

Your requirement "-There are 2 Real Servers and I want Real Server1 is Active and Real Server 2 is Standby."

 

This is always met by configuration definitions made. There is no automatic role changes, meaning  if realserver1 is available, it would always be the active server as configured.

 

Best regards,

Jin

1 reply

jintrah_FTNT
Staff
jintrah_FTNTAnswer
Staff
March 28, 2022

Dear Sathapon,

 

Your requirement "-There are 2 Real Servers and I want Real Server1 is Active and Real Server 2 is Standby."

 

This is always met by configuration definitions made. There is no automatic role changes, meaning  if realserver1 is available, it would always be the active server as configured.

 

Best regards,

Jin

    Sathapon_SS
    Sathapon_SSAuthor
    Explorer II
    March 29, 2022

    Hi @jintrah_FTNT ,

     

    Thank you for the information.

      Terms & ConditionsAccessibility statement