[Q] DHCP Server Option 150

Hi, there.

I'm preparing to set the "option 150" settings as follows..

Are both the correct commands?

TFTP Server 1 - 10.10.10.1.

TFTP Server 2 - 10.10.10.2

ex)1 config system dhcp server edit 1 set option1 150 '0A0A0A0A010A0A0A0A02' next end

ex2) config system dhcp server edit 1 set option1 150 '0A0A0A0A01' set option2 150 '0A0A0A0A02' next end

I think the first command is correct. What do you think?

Thanks.

SuperUser

You're misunderstanding the "value" you need to translate into HEX for option 150. See below thread:

SuperUser

@reiyun: both code lines are incorrect...try

   set option1 150 '0a0a0a01'
   set option2 150 '0a0a0a02'

It's only 4 bytes, not 5...

SuperUser

As I posted based on my experience with Cisco, or other, IP phones, they take binary with option 150. Not dotted-decimal notation.

Sign up