Skip to main content
ZZDVA0B
ZZDVA0B
New Member
February 20, 2020
Question

Problem Release version 6.0.0 with Fortigate Firewall 200D

  • February 20, 2020
  • 1 reply
  • 1976 views

Hi all,

I'm facing a problem with the upgrade from release 5.6.11 to 6.0.7 or 6.0.9.

 

Each time that I proceed with the upgrade of the Firewall Fortigate 200D to any release 6.0.0, I lose packets on Management Interface.

 

Does Any Idea or Help of What It Could be?

 

Thanks in advance

 

Danilo

    1 reply

    Dave_Hall
    Dave_Hall
    New Member
    February 24, 2020

    What have you done in terms of troubleshooting?

     

    Have you performed a diag hardware deviceinfo nic mgmt on the CLI to see what the duplex/speed is and if the RX/TX counters are giving any errors?  If there are any RX/TX errors are those counters increasing over time?

     

    Is the duplex/speed forces on the mgmt interface?  (e.g. perform config system interface mgmt and see if there is a set speed option.)

     

    What is the other side of that mgmt interface connected to?  Have you connected a laptop to that port? 

    Directly following the firmware upgrade, have you performed on the CLI: diagnose debug config-error-log read ?

     

    How about diag debug crashlog read or get system startup-error-log?

    Have you performed a config diff between the 5.6 and 6.0.x firmwares?

    Terms & ConditionsAccessibility statement
    Thought Leadership Security Summit. Outpace New Threats with AI - enhanced defense. Tuesday, Septmeber 15, 8:30 AM - 2:30 PM PT. The Golf Club at Newcastle, WA.
    Virtual event | September 2026. SASE summit. The age of autonomous trust. Register here!