Skip to main content
A
Anonymous_User
Contributor
March 11, 2010
Question

Port 445 not accessible through SSL VPN Tunnel

  • March 11, 2010
  • 3 replies
  • 3166 views
Hello all, Wondering if anyone else has run into this issue. Vista and XP client systems while in VPN SSL Tunnel mode, can' t telnet or access port 445. I have all services and ports accessible through the SSL gateway on the firewall policy. Any ideas on what to look for? Thanks! Zane

    3 replies

    A
    Anonymous_UserAuthor
    Contributor
    March 13, 2010
    Hi suggestions only Can you initiate ping from ssl client to the workstation? Pls check also your routing. Thanks
    A
    Anonymous_UserAuthor
    Contributor
    March 15, 2010
    Yes, ping works as do all other services that we need. The Vista client computer is attempting to establish a mapped drive and it is giving errors that the destination firewall (The ForitNet) has port 445 blocked. The firewall policies have the rule to allow all services in both directions.
    A
    Anonymous_UserAuthor
    Contributor
    March 21, 2010
    i assume that it because you have to enable the smb?cifs option in the ssl portal page settings. ssl- portal- click on the applied portal page- settings- enable smb/cifs option.
    Terms & ConditionsAccessibility statement