Policy Route always cover static route...
Hello Every one
My office buy new 100D to be our Gateway. and using 2 ISP for sharing different office parts 's network。
Forti OS was 5.2.7
In our plan:
part A will using ISP A and WAN setting was get DHCP.
part B will using ISP B and WAN setting was static public IP, and default route setting here.
and they are each other's backup line.
After we build it finish, we found all parts will using ISP A , only when ISP A remove connect , they turn to ISP B.
Even we change ISP A's Distance to 100 to high than IPS B's 10, or we setting policy routes to make some one using IPS B.
It's not work .
But same setting we copy config to our service vender 's Lab using 60D and 500A, it's work!
We want to ask:
Does anyone have same problem, and fix it ? or what can we do to fix this strange problem? ask our vender to request tech support?
Hunt.liao
2016/07/04 09:40 AM Taiwan