Panasonic voip over Fortinet VPN

you might want to disable sip session helper and sip trace, take a look at this: http://docs.fortinet.com/fgt/handbook/fortigate-voip-sip-40-mr2.pdf

Hi, many thanks for the quick response. I have disbled sip-helper and sip-nat-trace at both ends of the tunnel but still no luck. The Panasonic uses G711 and I can see sessions between the PBX and the handset on 9000/9001 but they just wont play! I can de-register the handset and then register it to the PBX but just cant get the handset online. Thanks again Terry

Hi, it seems that NAT can be a problem with SIP if SIP is UDP based. The TCP based SIP would not exhibit these difficulties. I am not experienced with SIP but maybe you can benefit from this publication: http://csrc.nist.gov/publications/nistpubs/800-58/SP800-58-final.pdf esp. pg. 50+ Also, other ports than those you mentioned are associated with RTP. Namely 5060 and others.

You might want to look at this. http://www.voicesonic.com/panasonic/manuals/KX-TDAxx/KX-TDA50_100_200_600_IP_Telephone_Guide.pdf page 6-7 Interesting is that even if the phone is on the remote office you need to input the VLAN ID of the local office. VPN over internet not recommended according to the document. the 35ms might not be fast enough :)

Well, after reading a bit in the Panasonic Guide, I correct myself. The voice traffic is indeed using RTP over UDP, in your setup encapsulated in ESP/AH VPN packets. I don' t think NAT is an issue here because the payload will never be exposed to NAT. What is your setup regarding VLANs? VLAN tagged traffic will be untagged by the firewall ONLY if incoming to a VLAN interface. As VoIP traffic doesn' t need to be on a tagged VLAN you might circumvent this. What a hassle...

of course, I guess the phones use static IPs...or did you set up DHCP over IPSec?

Thanks to everyone, what a warm welcome to the forum. I have read all the links, thanks, some of them I had already poured over for many nights this month! The setup is as follows Office with PBX 192.168.1.0/24 PBX 192.168.1.5 (no option to set gateway) ipsec vpn to remote (Int mode on both Fortigates with static routes) Remote 192.168.200.0/24 Phone 192.168.200.6/255.255.255.0 pings go both ways and the maintenance channel on ports 9000/9001 is up. I can deregister the handset and reregister easily. VLAN is disabled on the handset as we dont have managed switches in the office and before shipping I confirmed that the handset works perfectly on the Office LAN. I would add that although I know the guide says it shouldnt work on the internet, we have 4 other remote offices with the exact same setup and it works a treat. They link to another US office with a Fortigate. I have duplicated the setups as much as I can but cannot get it to work. Despite all your kind suggestions I feel the time coming to call in the guys who setup our US operation. I was hopefull that someone would pop up and say ' Hey, you' ve missed XXXXX' If I get a solution I will share right here.