Operating Channel Confusion FAP223E in FOS 6.4.2

Hi!

Today I noticed some discrepancy between the actual operating Channel an the displayed one (both in AP and FGT)

Clients had a short outage, although there was no DAARP or Radar action going on.

Afterwards the AP & FGT showed CH 116 as the operating Channel, but the AP was clearly operating on Channel 100 (No extension channel confusion here, the AP was transmitting on CH 100!)

Both AP and FGT running FOS 6.4.2 with no weird RRP settings.

Anyone else noticed this strange behaviour too?

Could be devastating in a multi AP environment.

BTW. the FAP 223E memory usage (even after reboot) of 62-65% seems a bit high to me.