Skip to main content
huud
Explorer II
Nov 21, 2018 9:39 AM UTC
Question

Observium SNMP with Fortigate, cannot add device, Could not reach error..

So,

 

I'm trying to setup Observium with fortigate on the Left FW in the image running on Ubuntu.

 

Observium is installed and runs up in VM but I cannot add any device, its returns an error in both V1/V2c and V3, even though both Ubuntu and Fortigate can ping each other.

 

Error : https://postimg.cc/HJps3Ws4 (I have tried with and without Authentication and with all data such as UDP etc added, same error!)

 

Host file entry : https://postimg.cc/FkJPYJ89

 

I read somewhere, the community version does not add devices in this fashion, and need an entry in host file, however, when I look into the host file it already shows an entry pointing to the IP of the firewall.

 

I have tried all other possible solutions..

 

Anything I have missed ?

    4 replies

    crispy
    New Member
    Nov 21, 2018 9:53 AM UTC

    Have you enabled SNMP on the fortigate and added a community as well as adding the host ip address of the Observium system and set it to accept queries as well as enabling snmp version 1 or 2? I would suggest you get it working without authentication first, then move onto setting up snmp v3 with auth.

    Translate
    crispy
    New Member
    Nov 21, 2018 9:58 AM UTC

    Hold on, what IP is the firewall? From the hosts file, it looks like that .5 IP is the local observium system. You should be using the IP of the firewall or localhost for the local observium box.

    Translate
    Risk and Resilience in the Age of AI. An OT Thought Leadership Summit for Houston's Critical Infrastructure Leaders. Date: Thursday, December 3, 2026. Time: 8:30 am - 1:30 pm (CT). Location: The Westin Houston, Memorial City | 945 Gessner Road, Houston, TX 77024