Skip to main content
mwkirk
mwkirk
New Member
December 8, 2016
Question

No Logs after upgrade of 60D

  • December 8, 2016
  • 2 replies
  • 5643 views

Recently updated a 60D HA pair from 5.2.3 to 5.4.2.  It seems nothing is showing in the logging now..  I have it enabled so we should be seeing VPN Logins and that type of thing but nothing.  Any ideas??

 

Tx

Mike

    2 replies

    SCSIraidGURU
    SCSIraidGURU
    New Member
    December 8, 2016

    Upgrade path is 5.2.3 to 5.2.5 to 5.4.0 to 5.4.2.  Did you follow this?  http://docs.fortinet.com/uploaded/files/2806/Supported%20Upgrade%20Paths%20to%20FortiOS%20Firmware%205.4.0.pdf

    mwkirk
    mwkirkAuthor
    New Member
    December 9, 2016

    Yeah I followed the upgrade path....  It ended up being a simple fix:

     

    config log memory setting

    set status enable

    end

     

    Logs were working before the upgrades but after entering that they started back.

     

     

    SCSIraidGURU
    SCSIraidGURU
    New Member
    December 9, 2016

    Actually, I have a call open with Fortinet about something else.   I asked them about why I can't see logging on my 60E.  They said logging is disabled by default on all ports.   Go figure.  Every other firewall I ever used had logging enabled by default.   I was going to write you about it.

    hassan_zantout
    hassan_zantout
    New Member
    December 12, 2016

    go to Log & Report --> Log sitting.

    enable Local Traffic Log

    Terms & ConditionsAccessibility statement