Skip to main content
Ruethemann
Ruethemann
Visitor III
October 11, 2023
Question

no 802.1x (NAC) on ethernet port of FortiAP 421?

  • October 11, 2023
  • 1 reply
  • 786 views

Hello community,

we are looking into a NAC solution (wired ethernet standard 802.1x authentication ... usual deal).

 

However, i can't get the older ForitAP 421E (with latest sw 6.4.9) to talk with our switches.

Via CLI it seems the command is not there:

FortiAP-421E # cfg -a WAN_1X_ENABLE=1
Invalid name [WAN_1X_ENABLE]

 

I can configure the seetings via a Fortigate acting as WLAN controller (802.1X authentication in FortiAP profile) - but they do not have any effect. I sniffed the traffic from the AP, there are no EAP message sent.

 

The same works with a newer FortiAP 431F.

Could it be that wired NAC is not supported on the 421E?? 

 

Thanks for any hint,

Ingo

1 reply

ebilcari
Staff
ebilcari
Staff
October 11, 2023

I have the same model in the lab and it looks like enabling dot1x in the AP's uplink port is not supported for this firmware/model. This command that should list all the configuration doesn't contain any configuration related to it:

cfg -sall - list effective/all variables

This feature is mentioned only on later versions of firmware 7.x.

Emirjon
    Terms & ConditionsAccessibility statement