network outage after fgt and fortiswitch are in place

Forum|Forum|6 years ago
January 29, 2020
8 replies
7243 views

Hello,

I have a very strange situation.

I installed a FGT-51E and FSW-124E-FPOE with 6.2.3...

Since these systems are running users are reporting that they will be kicked out sometimes from the network. RDP sessions will be closed, program which are running on the server will be closed etc. And that is happening while they are working.

Very strange. I configured a ping test and during the "outage" the ping did not stopped.

I have no idea how to check what could be the root cause for that.

I configured two vlans (office and server) and assigned them as native vlan on the switch. Is this the correct way how to do that? On the firewall there is policy which is allowing the traffic without any restrictions.

6.0

M_M_SW

New Member

Recommended use FortiOS 6.0.9 and SwitchOS 6.2.3 cause Resolved Issues

592111 ： FortiSwitch shows offline CAPWAP response packet getting dropped/failed after upgrading from 6.2.2.

bmduncan34

New Member

I believe you need to leave your native vlan (vlan1) alone in that Native VLAN field, and add the appropriate vlan (Office or Server) in the Allowed VLANs field.