Skip to main content
pranavgupta
pranavgupta
New Member
March 8, 2023
Solved

Need to check the public ip of DHCP connectivity

  • March 8, 2023
  • 1 reply
  • 1581 views

Hello Team,

 

I have 2 ISP aconnectivity in my infra both connectivity using DHCP . I don't have access to the client machine but I wanted to confirm that weather both ISP public ip what they are getting as we checked in what is my ip or the ip we recieved 

pranavgupta_0-1678250962498.png

We recieved WAN ip as I have DHCP connectivity I wanted to have Nattedpublic ip Please help me how do i look into it through fortigate any command pl

Best answer by pranavgupta

Thanks for the answer I'have asked from the TAC team 
Answer is this 
diag sys waninfo ipify port1

1 reply

gfleming
Staff
gfleming
Staff
March 8, 2023

If you go to look at your Interfaces on the FortiGate you will see the public IP address assigned to each of your WAN interfaces. This will be the public IP address your clients will use depending on how you steer them out the links.

 

You can choose one link as preferred over the other using route priorities or admin distance.

 

You can set up link monitor so one link will take over if the other fails.

 

Lastly you can set up SD-WAN to intelligently steer traffic over one or the other or both links.

pranavgupta
pranavguptaAuthorAnswer
New Member
March 8, 2023

Thanks for the answer I'have asked from the TAC team 
Answer is this 
diag sys waninfo ipify port1

Terms & ConditionsAccessibility statement