Need Help in getting my Two ISP automatic failover.

Forum|Forum|7 years ago
August 31, 2018
3 replies
9091 views

Hi Team

I need help in configuring my 310B firewall.

I have two ISP need help in getting the ISP auto fail over. example when one ISP A fails the other ISP B need to take over.

in the current setup i have to manually change the AD distance so that the ISP B takes over and once ISP A is online i am again changing the AD back to the orginal one.

Thank you for all the help and support.

WAN

sw2090

SuperUser

Easiest way might be: have two default routes with same distance but different priority (ISP A has to have the lower value as prio!) plus at least one internet policy for each ISP.

Then primary it will use ISP A and when ISP A is gone it will use ISP B.

Maybe you would need some monitoring of your ISP to have the FGT figure out when one is gone ;)

shinepothenAuthor

Explorer II

Thank you for the reply I already have default route with same AD and different priority.

I am not sure on how to get the internet policy for each ISP. Please help me getting the internet policy so that if one internet is down the other internet will take over.