Skip to main content
player
player
New Member
October 6, 2015
Question

NAT on vdom links not working

  • October 6, 2015
  • 1 reply
  • 3152 views

Hi all,

 

i'm running 5.2.4 on 60d poe with software sw on the unit, i have tested the following scenarios :

1. NAT on vdom link - not working

2. NAT using 2 hardware interfaces (Internal3 and Internal4)dedicated to hardware vdom link - not working

 

the scenarios are very simple ones and the debug flow shows that NAT is not happening.

any ideas?

    1 reply

    emnoc
    emnoc
    New Member
    October 6, 2015

    Never heard of that, but the policies that you have NAT on are the packet flat out being dropped?

     

    A hardware  interface wire back2back which is what I assume is the later scenario should not be impacted. About the only limitations I've seen on vdom-link is you can use them for GRE-tunnel

     

    Ken

    player
    playerAuthor
    New Member
    October 7, 2015

    Hi emnoc,

     

    the packets are not dropped - forwarded without nat,

    what limitation of vdom link in regards to GRE is there - i have this exact configuration working beautifully on version 4 build 356  :)

     

    Terms & ConditionsAccessibility statement