Skip to main content
hutchenaround
hutchenaround
New Member
September 10, 2018
Question

NAT 1 to 1 question

  • September 10, 2018
  • 1 reply
  • 2109 views

I have a FG200D that is a landing zone for 10 /29's via IPSec tunnels.

 

I need to make each /29 landing NAT to identical IP on the other network

e.g.  10.10.10.24/29 network lands IPSEC and then is translated to 11.11.11.24/29.

 

I have tried central NAT, SNAT, and DNAT and nothing seems to be working.

 

Any assistance would be appreciated.

v/r

HutcH   

 

    1 reply

    jnowakowski
    jnowakowski
    New Member
    September 10, 2018

    Have you tried using IP Pools? I have a few 1 to 1 Overload IP Pools setup where the External IP Range start and ending address are the same. I then use these in my policies with NAT on and the option to Use Dynamic IP Pool. Just select the IP Pool from the list.

    Terms & ConditionsAccessibility statement